Error message

Warning: file_get_contents(https://ipinfo.io/52.14.231.146/country): failed to open stream: HTTP request failed! HTTP/1.0 429 Too Many Requests in include_once() (line 654 of /home/wireterminalstre/public_html/sites/default/settings.php).

WTST 2.5 kN Pull Tester

WTST 2.5 kN

Simple operation, minimal training required

WTST 2.5 kN

Automatic break detection and return

Clear pass/fail indication

WTST 2.5 kN

Hold to a load

The Wire Terminal Strength Tester (WTST 2.5 kN) provides high accuracy and repeatability when performing pull out tests on crimped, soldered and welded joints up to 2.5 kN (550 lbf). The motorised drive system of this pull tester ensures that there is no sudden application of force or jerking during the test and an easily-operated touch screen display allows fast, efficient testing by operators in a production environment.

International test standards generally stipulate that terminals must be pulled to destruction at a uniform pull speed (typically 25 to 50 mm/min), or alternatively be held at a sustained load for a defined period. This requires the use of a programmable motorised test system, for which the WTST 2.5 kN is ideal.

Key features

Suitable for AWG 4 to 40 in crimp or splice formation
Simple operation, minimal training required
One touch to select a program + one touch to start the test
Automatic break detection and crosshead return saves testing time
Hold to a load limit for a specified time

Clear pass/fail indication
Live graph and results display

Calculations and basic statistics
Full report and data export

Rugged, clear touch screen for production environment

System specification

2.5 kN (550 lbf) capacity
Loadcell measurement accuracy: : ±0.1% f.s.

Speed range: 1 to 1000 mm/min (0.04 to 40 in/min)
±0.2% of indicated speed or ±20 µ/min, whichever is greater. (See help.mecmesin.com for additional info.)

Dimensions (including. console): H × W × D, 941 × 546 × 414 mm (37 × 21 × 16 in)
Weight: 27 kg (60 lb)
Power supply: 240 V AC 50 Hz / 100 V AC 60 Hz

Loadcell

2.5 kN as standard, accurate to ±0.1% f.s. Lower capacity loadcells are also available.

Versatile

The WTST 2.5 kN is a versatile and fully-programmable tensile and compression tester, suited not only to pull testing of crimped terminals but also to a wide variety of force testing, for which a complete range of accessories is available. Typical related uses include: