Pull testers

Mecmesin's wire terminal strength testers, also known as pull or crimp testers, are accurate, reliable and provide excellent value.

Our testers are manufactured under strict ISO 9001 quality standards.

Do I need a manual or motorised pull tester?

That will depend on your application and the force involved.

Motorised or automated pull testers are essential to guarantee compliance with international and industry standards, since they apply force at a constant speed.

Manual testers are a cost effective option where a constant pull speed is not essential.

Software controlled pull testers also enable different testing routines to be applied easily by operators, collecting and graphing data using automatic calculations for a clear pass or fail sample status.

Mecmesin wire terminal strength testers offer a number of additional advantages, including...

  •  Higher load capacity (0 - 50 kN)
  •  Extensive range of grips and fixtures for different applications
  •  Pre-programmed test routines
  •  Hold at load
  •  Live graphing and results with statistical analysis
  •  Export reports as PDF or data to Excel

Error message

Warning: file_get_contents(https://ipinfo.io/18.227.48.131/country): failed to open stream: HTTP request failed! HTTP/1.0 429 Too Many Requests in include_once() (line 654 of /home/wireterminalstre/public_html/sites/default/settings.php).

Alluris FMT-W30 Manual wire terminal pull tester

Overview The FMT-W30 manual pull/crimp testing instrument range, manufactured by our German sister company Alluris, is designed for crimped wire terminal testing according to IEC, DIN, EN, BS, UL, SAE, MIL and NASA standards. Two versions are available in two capacities; 500 N and 1... Find out more

Alluris FMT-W40 Motorised wire terminal pull tester

Overview The FMT-W40 is a motorised wire-terminal pull tester. It is available in 2 models with a tensile strength capacity up to either 500N (110 lbf) or 1000N (220 lbf). It is rugged, compact and occupies little space on the benchtop. Specifically designed for ease of use with minimal... Find out more

WTST 10, 25 & 50 kN Pull Testers

The high capacity, twin-column Wire Terminal Strength Testers from Mecmesin are available in 3 capacities from 10 kN to 50 kN for testing a wide range of crimped, soldered and welded terminals. Ideally suited for large terminals and wires as used in applications such as... Find out more

WTST 5 kN Pull Tester

The mid-range Wire Terminal Strength Tester (WTST 5 kN) provides high accuracy and repeatability when performing pull out tests on crimped, soldered and welded joints up to 5 kN. The motorised drive system of this pull tester ensures that there is no sudden application of force or jerking... Find out more

WTST 2.5 kN Pull Tester

The Wire Terminal Strength Tester (WTST 2.5 kN) provides high accuracy and repeatability when performing pull out tests on crimped, soldered and welded joints up to 2.5 kN (550 lbf). The motorised drive system of this pull tester ensures that there is no sudden application of force or jerking... Find out more

WTST-dV 2.5 kN Pull Tester

Our entry-level Wire Terminal Strength Tester (WTST-dV 2.5 kN) provides a cost-effective solution for performing pull-out tests on crimped, soldered or ultrasonically-welded joints. International test standards generally stipulate that terminals must be pulled to destruction at a... Find out more