Error message
Warning: file_get_contents(https://ipinfo.io/3.14.247.239/country): failed to open stream: HTTP request failed! HTTP/1.0 429 Too Many Requests in include_once() (line 654 of /home/wireterminalstre/public_html/sites/default/settings.php).
The mid-range Wire Terminal Strength Tester (WTST 5 kN) provides high accuracy and repeatability when performing pull out tests on crimped, soldered and welded joints up to 5 kN. The motorised drive system of this pull tester ensures that there is no sudden application of force or jerking during the test and an easily-operated touch screen display allows fast, efficient testing by operators in a production environment.
International test standards generally stipulate that terminals must be pulled to destruction at a uniform pull speed (typically 25 to 50 mm/min), or alternatively be held at a sustained load for a defined period. This requires the use of a programmable motorised test system, for which the Mecmesin WTST series is ideal.
-
Suitable for AWG 0000 to 40 in crimp or splice formations - Simple operation, minimal training required
- One touch to select a program + one touch to start the test
- Automatic break detection and crosshead return saves testing time
- Hold to a load limit for a specified time
-
5 kN as standard, accurate to ±0.1% f.s. Lower capacity loadcells are also available.
The WTST 5 kN is a versatile and fully-programmable tensile and compression tester, equally suited to a wide variety of force testing, for which a complete range of accessories is available. Typical related uses include:
FrançaisContact Mecmesin
Got a question about this product?
Our technical sales engineers can help find the right solution for your testing requirements and provide online equipment demos with your samples.
